Crystall-BIO-P is meant for domestic or similar industrial wastewater biological treatment. The technology is based on the method of extended aeration, which allows to simplify plant operation and, consequently, minimize operating costs. The entire complex of units is made in underground (buried) design that allows to locate the units in any suitable place (from hydraulic point of view) and...

The flotator Crystall-FN is meant for physicochemical wastewater treatment (industrial, storm, domestic wastewater, etc.) from oil, grease, suspended solids, organic substances, surface-active substances and other insoluble pollutants and hydrophobic impurities. The flotation method is based on the ability of pollutants present in wastewater to form flotation complexes (aggregate with air b...

The plant is meant for domestic and similar industrial wastewater treatment in accordance with requirements of discharge into cultural and general surface water bodies and fishery water bodies, or for re-use for technical purposes. Crystall-BIO-MBR is used for deep biological treatment of wastewater of small settlements, cottage settlements, hotel complexes, health and medical institutions,...

The plant Crystall-R is meant for treatment of storm and melt wastewater of residential and industrial areas, parking lots and fuel filling station areas. Depending on local conditions and individual characteristics of each particular facility, the plants can be either of underground or land design. 

The thin-layer settler Crystall-L is a highly efficient plant used for surface water pretreatment / post treatment and wastewater tertiary treatment, as well as for wash water treatment after high-rate filters. Set at an angle of 55-65 degrees, the thin-layer modules provide efficient sedimentation of suspended solids from water or wastewater.   

It is a plant of mechanical wastewater treatment meant to remove coarsely dispersed suspended solids. The operation principle of the tangential sand catcher is based on the separation of discharge liquid and coarsely dispersed suspended solids under the influence of centrifugal and gravitational forces.

Crystall BIO-K is meant for domestic or similar industrial wastewater biological treatment. The technology is based on the method of extended aeration, which allows to simplify plant operation and, consequently, minimize operating costs. The entire complex of units is made in land containerized design that allows to locate the units on sites with difficult geological and hydrogeological con...

The grease catcher is meant for removal of non-emulsifying fats and oils from wastewater and industrial water of food and processing industry enterprises.

The grease catcher is mounted directly at the output of the industrial sewage system and prevents formation of fatty deposits on pipeline walls of the sewerage network; it is a separate pretreatment device require...

The plant Crystall-T is meant for organization of recycling water supply in car service centers: car washes, service stations, etc. The plant is equipped with necessary pumping equipment and treated water storage tanks. At Customer’s request, Crystall-T can be complimentary equipped with high-pressure units.

The technology is based on the method of electrocoagulation followe...

Crystall-SR is meant for salt or chemical solution making in chemical water treatment systems, chemical industry, road service and food industry. The body and all technological elements (including pump working parts) are manufactured of polymer materials, which are resistant to aggressive environments.

Complimentary, the station can be equipped with storage tanks fo...

Coalescing oil-water separators are meant to separate oil-water emulsions formed in oil production technology, oil and oil product processing, transportation and storage. They are used to separate and regenerate oil products from process wastewater and water solutions of oil refineries, dewater highly watered oils, treat stratal and bottom waters of oil fields and tank farms, treat ballast ...

It is meant for electrochemical wastewater treatment (industrial, storm, domestic wastewater, etc.) from oil, grease, suspended solids, organic substances, surface-active substances and other insoluble contaminants and inorganic impurities. The electroflotator is usually used in systems of multistage wastewater treatment as an intermediate stage for increasing the degree of treat...

It is meant for preparation, storage and dosing of reagent solutions in chemical water treatment systems, chemical industry; it operates in an automatic mode. It can be made of polymer materials or stainless steel.

It is meant to treat sand pulp discharged from sand catchers and separate mineral and organic parts in order to reduce the load on grit dewatering bays. Its basic version is equipped with a replaceable polymer trough part of a screw conveyor in order to extend equipment service life and reduce maintenance and repair costs.

It is meant for mechanical wastewater treatment from large particulate matter of 1 mm and more. The removal of detained contaminants occurs due to the rotational-translational movement of operating plates relative to each other.

It is meant for mechanical wastewater treatment from large particulate matter of 3 mm and more. It is equipped with a rake mechanism for the removal of detained contaminants from screen bars.

It is meant for mechanical wastewater treatment from large particulate matter of 1 mm and more. The drum screen can be equipped (RB-Sch version) with a brush mechanism for the removal of detained contaminants and cleaning of a screen working area.

It is a plant of mechanical wastewater treatment meant to remove coarsely dispersed suspended solids. The operation principle of the tangential sand catcher is based on the separation of discharge liquid and coarsely dispersed suspended solids under the influence of gravitational forces.

It is a plant of mechanical wastewater treatment meant to remove coarsely dispersed suspended solids. The operation principle of the tangential sand catcher is based on the separation of discharge liquid and coarsely dispersed suspended solids under the influence of gravitational forces.

It is meant for mechanical wastewater treatment from large particulate matter of 0.3 mm and more and preliminary dewatering of detained contaminants. The removal of contaminants occurs due to constant rotation of a screen working area.

It is meant to treat storm and melt wastewater of settlements and industrial sites after storage tanks in accordance with the requirements of discharge into water bodies or the requirements of technical water supply. Its basis are containers of standard transport dimensions. Besides, they allow the customer to save on construction works as the containerized station is of full factory readin...

It is meant to remove large particulate matter (screen), coarsely dispersed suspended solids (sand catcher) and surface oil products.